VoiceGuide IVR Software Main Page
Jump to content

Dialing Out From A Script Not Working

Recommended Posts

I want to set up a script so that when I input "1234" into a get numbers module, my dialogic card will dial out to a separate cellphone number through a transfer call module.

 

I have a 4-line dialogic D4PCIUF with 2 lines hooked up in the back.

 

When a user calls in (using one line) and inputs 1234, the script doesn't seem to transfer it to the separate cell number.

 

In the transfer module, I tried both "3-way conference call" and "dialout and conference."

 

The outbound dialer program works, however. I tried it.

 

Please help.

Share this post


Link to post

You would not be able to use Dial and Conference with the D/4PCIU card. You need a D/41JCT card or better to do Dial and Conference.

 

Does the PBX or switch from which these lines are supplied supports hookflash transfers or 3-way conferencing?

Are you able to do transfers or 3-way conferences when using a telephone handset attached to those lines? How do you do a 3-way conference when doing it manually using a telephone handset?

Share this post


Link to post
You would not be able to use Dial and Conference with the D/4PCIU card. You need a D/41JCT card or better to do Dial and Conference.

 

Does the PBX or switch from which these lines are supplied supports hookflash transfers or 3-way conferencing?

Are you able to do transfers or 3-way conferences when using a telephone handset attached to those lines? How do you do a 3-way conference when doing it manually using a telephone handset?

 

 

I am not using a PBX. I am using Vonage (www.vonage.com) phone service - internet phone service, and connect a telephone line from the Vonage box to the back of my D/4PCIU. Do I need a PBX to do outbound calling? (I have two lines connected to Vonage box and D/4PCIU).

 

If I need a PBX, can you recommend a vendor and a model? Can Vonage service works with a PBX?

 

 

Share this post


Link to post

Does Vonage allow you to do 3-way transfers or hookflash transfers?

 

I think the easiest approach would be to get a D/41JCT card and do "Dial and Conference" transfers.

Share this post


Link to post

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×