VoiceGuide IVR Software Main Page
Jump to content

Unexpected Call Terminate

Recommended Posts

Hi,

 

In script after transfr call we are waiting in empty play module until end of call. but now happen disconnecting described in log:

 

 

131559.651 20 107 36 ev Dialogic 134,TDX_CST, crn=2b401a1, 1107,0,0,DE_TONEON,FAX,
131559.651 20 107 36 q_scr + evScriptEvent 134 FAX
131559.651 20 107 36 q_scr + evScriptEvent 134 TDX_CST
131559.651 7 107 36 q_scr run evScriptEvent sCode=[FAX] iActionID=0, crn=2b401a1 [1107|0|0|0|0][DE_TONEON|FAX||||] 00:00:00 max:6|00:00:00.4950283
131559.651 7 107 36 se FAX 134 1107|0|0 DE_TONEON|FAX| LineState=LS_XFER_9_WAITENDCALL_DialingSide
131559.651 7 107 36 LsXfer_9_WaitEndCall_OutLeg : [134:FAX] 1107,0,0,DE_TONEON,FAX,
131559.651 7 107 36 LsXfer_9_WaitEndCall_OutLeg pass event to InLeg. sCode=FAX
131559.651 7 4 2 q_scr + evScriptEvent 134 OTHER_LEG_FAX
131559.652 7 107 36 q_scr run evScriptEvent sCode=[TDX_CST] iActionID=0, crn=2b401a1 [1107|0|0|0|0][DE_TONEON|FAX||||] 00:00:00 max:6|00:00:00.4950283
131559.652 7 107 36 se TDX_CST 134 1107|0|0 DE_TONEON|FAX| LineState=LS_XFER_9_WAITENDCALL_DialingSide
131559.652 7 107 36 LsXfer_9_WaitEndCall_OutLeg : [134:TDX_CST] 1107,0,0,DE_TONEON,FAX,
131559.652 7 107 36 LsXfer_9_WaitEndCall_OutLeg pass event to InLeg. sCode=TDX_CST

 

How to ignore fax tone in play module?

Share this post


Link to post

Please post a fuller trace. The posted trace excerpt does not capture the actual call hangup.

 

Please .ZIP up longer traces and post them as attachments.

Share this post


Link to post

In my opinion disconnecting reason is:

 

131558.708 7 4 2 path {OTHER_LEG_FAX} not found

 

How to preserve this?

Share this post


Link to post

Quoted vgEngine trace log line is just advice that a certain path is not found.

 

It is not a disconnection trace log entry.

Share this post


Link to post

Please post a fuller trace. We can then see what happened on system and advise.

 

Please .ZIP up longer traces and post them as attachments.

Share this post


Link to post

I attached vg_engine file. several times vg terminating calls after 8-9 minutes.

example call id is: ID20141029143149196 channel 6,

 

I found probably terminating start in 20055 line

144025.584 20 98 33 ev Dialogic 134,TDX_CST, crn=2c8014c, 1098,0,0,DE_TONEON,FAX,

 

and after it looks like vg received fax tone and not found fax path terminating call.

 

 

can you explain this case?

vg_engine.zip

Share this post


Link to post

Call on port 33 was disconnected at 14:40:51 as the "DISCONNECT_USER_1" tone was heard on line:

 

144051.190 20 98 33 ev Dialogic 134,TDX_CST, crn=2c8014c, 1096,0,0,DE_TONEON,DISCONNECT_USER_1,

...

144051.202 7 98 33 HangupCall (LineEvCallState_DISCONNECTED) crn_in=2c8014c, L1=Disconnected

...

144051.397 20 98 33 ev CallState GCEV_DROPCALL, crn=2c8014c, iEvent=0 ,1,0,32, s1:, s2:, s3:]. build_date: 2014-04-04 13:32:46.19

 

 

The "DISCONNECT_USER_1" tone definition is set in ConfigLine.xml file.

 

If you do not wish to have this tone detected then either remove the entire DISCONNECT_USER_1 tone definition from the ConfigLine.xml file, or set that tone definition to values unlikely to be encountered. Something like this:

 

<Tone Name="DISCONNECT_USER_1">
<Notes>Disconnect Tone</Notes>
<ID>DISCONNECT_USER_1</ID>
<Freq1>1000</Freq1>
<Freq1Dev>10</Freq1Dev>
<Freq2>2000</Freq2>
<Freq2Dev>10</Freq2Dev>
<On>100</On>
<OnDev>0</OnDev>
<Off>100</Off>
<OffDev>0</OffDev>
<Count>10</Count>
</Tone>

Also, if there is a DISCONNECT_USER_2 tone definition in the ConfigLine.xml file then you may want to look at removing/amending it as well.

You are running an E1 ISDN system, so its probably not necessary to have these tones defined.

Share this post


Link to post

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×