VoiceGuide IVR Software Main Page
Jump to content

$rv Error 1032

Recommended Posts

I am a beginner with a script in progress. I am encoraged by the many positive coments on your support groups page as to the usefullness of this software.

 

Can one explain the "1032" errors in the trace. I am trying to evaluate the number of transfers to attempt based the route a call took, and menu selections from prior modules; while useing only one transfer routine. After a menu selection I am setting a value to various $RV's.

 

Also the clean up script is not working. ??? It is intended to set all the $RV's back to 0.

 

Is a better way recomended?

 

71003 0 tapie linedevstate 2048 0 0

71003 0 tapie callstate OFFERING 11935936 0 4

71023 0 tapie callinfo CALLEDID

71033 0 tapie callinfo ORIGIN

71033 0 tapie ring 0

77022 0 tapie ring 2

83041 0 tapie ring 3

83041 0 Answer the call

83051 0 lineAnswer(11935936) => 1

83591 0 tapie callstate CONNECTED 11935936,1,0

83591 0 WorkingModeTAPI=

83591 0 WorkingModeScript=

83641 0 Inband detection not enabled

83651 0 tapi Reply 1 0

83651 0 [Agency Welcome] Playing

83651 0 [Agency Welcome] Playing (C:\Agcy WAVS\AgcyWcm.wav)

83882 0 PlaySoundStart ok [C:\Agcy WAVS\AgcyWcm.wav]

83892 0 RunModule PLAY end

97592 0 wb(98366100)

97652 0 Play End line[0] (id=983661)

97662 0 LsPlayMsg EV_PLAY_FINISHED

00576 0 tapie monitordigits 49 2

00586 0 LsPlayMsgFinished [1]

00596 0 [G1 or Other] Playing

00596 0 [G1 or Other] Playing (C:\Agcy WAVS\G1 or Oth.wav)

00646 0 PlaySoundStart ok [C:\Agcy WAVS\G1 or Oth.wav]

00646 0 RunModule PLAY end

03690 0 tapie monitordigits 50 2

03700 0 LsPlayMsg [2]

03760 0 PlaySoundStop ok

03770 0 [Prog or Other?] Playing

03780 0 [Prog or Other?] Playing ()

03790 0 File not found (empty string) {Wav not created yet}

03830 0 PlaySoundStart ok [C:\Program Files\VoiceGuide\system\voicedlgc\SoundFileNotFound.wav]

03840 0 RunModule PLAY end

05964 0 tapie monitordigits 49 2

05974 0 LsPlayMsg [1]

06034 0 PlaySoundStop ok

06044 0 [set P =1] Evaluate [1]

06054 0 .Eval(1)

06064 0 Eval Expr result:[1]

06074 0 [Check Upagent (x)] Evaluate [$RV[upAgent]]

06084 0 RVreplace start: [$RV[upAgent]]

06094 0 RVreplace end: [$RV[upAgent]]

06104 0 .Eval($RV[upAgent])

06114 0 Error: 1032

06124 0 Eval Expr result:[$RV[upAgent]]

06444 0 LsXferStart EV_TIMEOUT_READYTOBEGINTRANSFER

06454 0 [Find Dan In office] Announced Transfer to 6745536 (Generate)

06484 0 tapic lineGenerateDigits(11935936,!) => 0

06895 0 tapie generate LINEGENERATETERM_DONE

07886 0 LsXferStart EV_TAPI_GENERATE

09088 0 LsXferPlayVts EV_HOOKFLASHFINISHED

09128 0 tapic lineGenerateDigits(11935936,6745536) => 0

10180 0 tapie generate LINEGENERATETERM_DONE

11141 0 LsXferPlayVts EV_TAPI_GENERATE

11141 0 fn PlaySoundStartNumbers TsfrCallFrom.wav, TsfrAskAccept.wav, , Digits

11151 0 twcal PlaySayNumber C:\Program Files\VoiceGuide\system\voicedlgc\TsfrCallFrom.wav, C:\Program Files\VoiceGuide\system\voicedlgc\TsfrAskAccept.wav, , , 1

11181 0 PlaySoundStartNumbers ok

18171 0 wb(1115101)

18221 0 Play End line[0] (id=11151)

18221 0 LsXferPlayAnn EV_PLAY_FINISHED

18231 0 LsXferPlayAnn EV_TIMEOUT_REPLAYMSG

18231 0 fn PlaySoundStartNumbers TsfrCallFrom.wav, TsfrAskAccept.wav, , Digits

18241 0 twcal PlaySayNumber C:\Program Files\VoiceGuide\system\voicedlgc\TsfrCallFrom.wav, C:\Program Files\VoiceGuide\system\voicedlgc\TsfrAskAccept.wav, , , 1

18271 0 PlaySoundStartNumbers ok

25271 0 wb(1824101)

25341 0 Play End line[0] (id=18241)

25351 0 LsXferPlayAnn EV_PLAY_FINISHED

25361 0 LsXferPlayAnn EV_TIMEOUT_REPLAYMSG

25371 0 fn PlaySoundStartNumbers TsfrCallFrom.wav, TsfrAskAccept.wav, , Digits

25381 0 twcal PlaySayNumber C:\Program Files\VoiceGuide\system\voicedlgc\TsfrCallFrom.wav, C:\Program Files\VoiceGuide\system\voicedlgc\TsfrAskAccept.wav, , , 1

25422 0 PlaySoundStartNumbers ok

32372 0 wb(2539101)

32442 0 Play End line[0] (id=25391)

32452 0 LsXferPlayAnn EV_PLAY_FINISHED

32462 0 LsXferPlayAnn EV_TIMEOUT_REPLAYMSG

32472 0 fn PlaySoundStartNumbers TsfrCallFrom.wav, TsfrAskAccept.wav, , Digits

32482 0 twcal PlaySayNumber C:\Program Files\VoiceGuide\system\voicedlgc\TsfrCallFrom.wav, C:\Program Files\VoiceGuide\system\voicedlgc\TsfrAskAccept.wav, , , 1

32522 0 PlaySoundStartNumbers ok

39482 0 wb(3249201)

39532 0 Play End line[0] (id=32492)

39532 0 LsXferPlayAnn EV_PLAY_FINISHED

39542 0 LsXferPlayAnn EV_PLAY_FINISHED

39562 0 tapic lineGenerateDigits(11935936,!) => 0

39952 0 tapie generate LINEGENERATETERM_DONE

40864 0 LsXferPlayAnn EV_TAPI_GENERATE

40864 0 PlayFinishCause=CallRejected

40864 0 Going down Fail path (iXferType=1)

40874 0 [Hook flash] Playing

40894 0 tapic lineGenerateDigits(11935936,!) => 0

40894 0 RunModule PLAY end

41284 0 tapie generate LINEGENERATETERM_DONE

42196 0 LsPlayMsg EV_TAPI_GENERATE

47203 0 LsPlayMsgFinished EV_TIMEOUT_GOTOMODULE

47213 0 [Check Spc Agt] Evaluate [$RV[spc Agt]]

47223 0 RVreplace start: [$RV[spc Agt]]

47233 0 RVreplace end: [$RV[spc Agt]]

47243 0 .Eval($RV[spc Agt])

47253 0 Error: 1032

47263 0 Eval Expr result:[$RV[spc Agt]]

47273 0 [is CH False] Evaluate [$RV[CH]]

47283 0 RVreplace start: [$RV[CH]]

47293 0 RVreplace end: [$RV[CH]]

47303 0 .Eval($RV[CH])

47313 0 Error: 1032

47323 0 Eval Expr result:[$RV[CH]]

47333 0 [CH Counter] Evaluate [$RV[CH]+1]

47343 0 RVreplace start: [$RV[CH]+1]

47363 0 ERROR 4.9.0 RunModule:0:5:Invalid procedure call or argument:VgMulti

47373 0 HangupCall called from [Run module 3115]

47383 0 Hanging up call...

47393 0 PlaySoundStop ok

47403 0 fnHangupCall end

47443 0 tapie linedevstate 2048 0 0

47453 0 tapie callstate IDLE 11935936 0 0

47463 0 WorkingMode@Idle=

47483 0 After Hangup script:[C:\Program Files\VoiceGuide\Scripts\CleanUp.vgs]

47523 0 Loaded VbsAtHangup into:3

47533 0 ERROR 4.9.0 TW__LineEvCallState_Error:Subscript out of range

47543 0 tapi Reply 2 0

Share this post


Link to post

VoiceGuide is showing "Error 1032" as it is trying to evaluate Result Variables which have not yet been defined.

 

The script is trying to use: $RV[upAgent], $RV[spc Agt] and $RV[CH] - but none of them have been previously defined/set by the script...

 

If you can post your script here I can have a look at it and offer better advice...

Share this post


Link to post

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×