Jump to content

< Back to Forum


Low Cost Card

  • Please log in to reply

#1 researcher 02 December 2017 - 08:52 PM

Dear Sir

I am having Window XP SP3 with CPU i3 2GHz, RAM 2GB . I want to develop an  IVRS with auto dialing as the only basic feature. Where can I get the lowest cost card online? Please advice the card. Easy installation will be appreciated. I am not expert.


prof. Bhagat

#2 SupportTeam 03 December 2017 - 04:45 AM

Used Dialogic cards can be sourced on EBay. Searching EBay for the Dialogic card models: D/4PCIUF and D/41JCT should let you find some.


Card installation is pretty straightforward. Just place in system and then install the Dialogic card drivers available from our Downloads page.

#3 researcher 04 December 2017 - 03:38 PM


#4 researcher 04 December 2017 - 03:50 PM

I found this search. Which lowest cost card will be ok to go for https://www.ebay.com...=p2054436.m1684

#5 SupportTeam 04 December 2017 - 04:06 PM

Do a search for this:


Dialogic D/4PCIU


the D/4PCIU can be used in both traditional 5V PCI slots, and in the 3.3V PCI slots.


Here is one of the search results:



#6 researcher 04 December 2017 - 07:43 PM

Can I use this ?



or this ?



#7 SupportTeam 04 December 2017 - 10:00 PM

Both are fine.


The second card (D/41JCT) has more functionality then the first card (D/4PCIUFW). Main difference is that you can bridge two calls together on the D/41JCT card.


D/41JCT is a 'full length' card, and the D/4PCIUF is a 'half length' card.



In addition: Please note that the D/41JCT listing shows a PCI (universal) card, but description says PCIe (ie. 'PCI Express'). You should check with seller what type of card it is.

Edited by SupportTeam, 05 December 2017 - 08:51 AM.
Added note about PCIe

#8 researcher 05 December 2017 - 01:54 AM

Thanks support team. This helps me fully.

#9 researcher 05 December 2017 - 08:36 PM

Before you close this thread just let me know if each of the following will work for voice and fax?










I will buy the best from the above upon your recommendation.

#10 SupportTeam 05 December 2017 - 09:07 PM

Number 3 and 4 :

Dialogic D4PCIUFWEU Voice Board


Dialogic D/41JCT-LS

are both equally good for fax and voice

Do not buy 1 or 2.

#11 researcher 05 December 2017 - 09:27 PM

:) Thanks

#12 researcher 05 December 2017 - 09:42 PM

How about this one? Does it work for voice and fax if not  better than 3, 4 above?



#13 SupportTeam 05 December 2017 - 09:58 PM

That card (Dialogic D120JCTLSW) is a 12-port Analog card. (D/41JCT and D/4PCIU series cards are all 4 port cards).


It's also a PCIe card, not PCI.


It's good value at that price.

#14 researcher 06 December 2017 - 10:40 PM

I am interested in buying this one




Is it ok if I place order now? Just want voice and fax for developing an ACD and voice attendant.

#15 researcher 07 December 2017 - 12:30 AM

Will the following cards be useful for ACD & voice attendant works?





#16 SupportTeam 07 December 2017 - 06:45 AM

For ACD systems you must use 'JCT' series cards. The last 3 links posted are not JCT cards.


Analog JCT cards are: D/41JCT and D/120JCT.

#17 researcher 08 December 2017 - 01:28 AM

If I just want to create a script  for outbound dialing services then can I use this card?



#18 SupportTeam 08 December 2017 - 06:44 AM

No. That is a really old card. Also, it is a ISA card.


Both cards posted by you in this post: http://voiceguide.co...c=12748&p=43034


and cards 3 and 4 in your post here: http://voiceguide.co...c=12748&p=43048


were fine. Why didn't you select one of those 4 cards?

#19 researcher 08 December 2017 - 04:31 PM

Purchase order placed for


Dialogic D4PCIUFWEU Voice Board - PCI - 4 x Phone Line (RJ-11) - Plug-in Card


Also tagged with one or more of these keywords: dialogic, refurbished