VoiceGuide IVR Software Main Page
Jump to content

Other Voip Software In Same Server

Recommended Posts

Just one doubt. Can I have a second Voip software on the same computer where voiceguide/dialogic is running ? IN the case it would be a T.38 FoIP FAX, connected to a different voip provider than those used by voiceguide, but using the same computer and the same internet link/network card.

I'm asking this before to install such a software in order not to risk to create a problem.

Thanks

Share this post


Link to post

There would most likely be a clash for the UDP port 5060.

 

If you can set up the other software to use a different UDP port then it may be possible to run both applications at same time.

Share this post


Link to post

hey saw your question and thought I would pass this on to you I have a windows 2008 r2 server with 2 Ethernet ports installed and I have static ip each one of them and I have 3cx phonesystem runnimg on one and voiceguide running on the other, you must also have 2 outside static ip address's and in your router you open up the firewall or disable it, then program

1-to-1 NAT and point 1 outside static ip at 1 inside static ip and then do the same with the other,, I use port 5060 for voiceguide and I use port 5062 for 3cx and it took me some time to get all this worked out but it works just great

Share this post


Link to post

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×