Guest ChrisAbston Report post Posted 06/30/2004 08:36 PM Here is my log, i am in GENERATE mode not AT. If I don't chose to put the call on hold before the transfer it will send the dtmf tones to dial, but if I do but the call on hold before the transfer then it will not send the dtmf tones. Also if I bypass that and put my dial string to be ! ,,,, 1234567 ,,,, ! then I still receive the same effect it will not send the dtmf tones. I am currently in the trial phase of this program and if I can get it to do a 3-way confrence initiated by the computer I plan on buying this for all my offices until then I patiently await an answer. Thanks, Chris 161928.72 0 callstate OFFERING 65624 0 4 161928.72 0 ring 1 161929.94 0 Lev_CallerID [8138330047,ABSTON CHARLES] 161929.94 0 Lev_CallerID [8138330047,ABSTON CHARLES] 161934.72 0 ring 2 161934.72 0 Answer the call at 6/30/2004 4:19:34 PM 161934.72 0 lineAnswer(65624) => 65538 161934.72 0 callstate ACCEPTED 65624 0 0 161934.82 0 tapi Reply (LineEvReply) ok 65538 0 161934.82 0 callstate CONNECTED 65624,0,0 161934.82 0 WorkingModeTAPI@Connected= 161934.82 0 WorkingModeScript@Connected= 161934.82 0 Inband detection not enabled 161934.82 0 StartLoadedVgs at 6/30/2004 4:19:34 PM 161934.82 0 AddRVns [scriptsPath]{C:\Program Files\VoiceGuide\Scripts\} 161934.82 0 rv add [$RV_STARTTIME]{6/30/2004 4:19:34 PM} 161934.82 0 rv add [$RV_DEVICEID]{0} 161934.82 0 rv add [$RV_CIDNAME]{ABSTON CHARLES} 161934.82 0 AddRVns [PathApp]{C:\Program Files\VoiceGuide\} 161934.82 0 rv add [$RV_CIDNUMBER]{8138330047} 161934.82 0 TimeoutClear 161934.82 0 [Play 1] Playing 161934.82 0 tts generate start[Hello yuo have reached Chris and Malinda Abston we are not able to take your call please press 1 to leave a message or press 5 to be transfered to Chris's Cell phone.] 161934.82 0 tts generate wait 161934.82 0 RunModule PLAY end 161934.97 0 tts generate finish 161934.97 0 [Play 1] Playing (C:\Program Files\VoiceGuide\data\tts0.wav) 161935.05 0 PlaySoundStart ok [C:\Program Files\VoiceGuide\data\tts0.wav] 161935.07 0 TimeoutClear 161935.07 0 wa(10195,78021800) 161945.25 0 Play End line[0] (id=780218) 161945.25 0 ScriptEventCode 8001 iLineState=1100 161945.25 0 LsPlayMsg EV_PLAY_FINISHED 161945.25 0 TimeoutSet 10 EV_TIMEOUT_REPLAYMSG 161946.13 0 dtmf 3 (65624,51,2) 161946.13 0 ScriptEventCode 51 iLineState=1101 161946.13 0 LsPlayMsgFinished 3 161946.13 0 rv add [Play 1]{3} 161946.13 0 TimeoutClear 161946.13 0 TimeoutSet 0.4 EV_TIMEOUT_READYTOBEGINTRANSFER 161946.57 0 Timer fired EV_TIMEOUT_READYTOBEGINTRANSFER 161946.57 0 ScriptEventCode 9012 iLineState=1900 161946.57 0 LsXferStart EV_TIMEOUT_READYTOBEGINTRANSFER 161946.57 0 TimeoutSet 30 EV_TIMEOUT_ANNOUNCED_TRANSFER_ATTEMPT_TOOK_TOO_LONG 161946.57 0 [Dad (3)] Blind Conference to 9925905 (Generate) 161946.57 0 tapic lineGenerateDigits(65624,!,0) => 0 161947.08 0 generate LINEGENERATETERM_DONE 161947.08 0 TimeoutSet 1 EV_TAPI_GENERATE 161948.10 0 Timer fired EV_TAPI_GENERATE 161948.10 0 ScriptEventCode 9602 iLineState=1900 161948.10 0 LsXferStart EV_TAPI_GENERATE 161948.10 0 TimeoutSet 1 EV_HOOKFLASHFINISHED 161949.19 0 Timer fired EV_HOOKFLASHFINISHED 161949.19 0 ScriptEventCode 9200 iLineState=1905 161949.19 0 LsXferPlayVts EV_HOOKFLASHFINISHED 161949.19 0 tapic lineGenerateDigits(65624,9925905,0) => 0 161950.13 0 generate LINEGENERATETERM_DONE 161950.13 0 TimeoutSet 1 EV_TAPI_GENERATE 161951.16 0 Timer fired EV_TAPI_GENERATE 161951.16 0 ScriptEventCode 9602 iLineState=1905 161951.16 0 LsXferPlayVts EV_TAPI_GENERATE 161951.16 0 tapic lineGenerateDigits(65624,!,3,0) => 0 161951.91 0 generate LINEGENERATETERM_DONE 161951.91 0 TimeoutSet 1 EV_TAPI_GENERATE 161952.91 0 Timer fired EV_TAPI_GENERATE 161952.91 0 ScriptEventCode 9602 iLineState=1906 161952.91 0 LsXferPlayAnn EV_TAPI_GENERATE 161952.91 0 PlayFinishCause= 161952.91 0 Going down Success path (iXferType=2) 161952.91 0 TimeoutClear 161952.91 0 [Get Numbers 5] Number Input 161952.91 0 [Get Numbers 5] Playing () 161952.91 0 ScriptEventCode 8001 iLineState=1300 161952.91 0 LsGetNbrsPlayWelcMsg EV_PLAY_FINISHED 161952.93 0 TimeoutSet 5 EV_TIMEOUT_REPLAYMSG 161958.39 0 Timer fired EV_TIMEOUT_REPLAYMSG 161958.39 0 ScriptEventCode 9005 iLineState=1301 161958.39 0 LsGetNbrsRxDigits EV_TIMEOUT_REPLAYMSG 161958.39 0 [Get Numbers 5] Playing () 161958.39 0 ScriptEventCode 8001 iLineState=1300 161958.39 0 LsGetNbrsPlayWelcMsg EV_PLAY_FINISHED 161958.39 0 TimeoutSet 5 EV_TIMEOUT_REPLAYMSG 161959.61 0 dtmf 9 (65624,57,2) 161959.61 0 ScriptEventCode 57 iLineState=1301 161959.61 0 LsGetNbrsRxDigits 9 161959.61 0 [Get Numbers 5] Number Input 9 161959.61 0 path {9} not found 161959.61 0 TimeoutSet 6 EV_TIMEOUT_ENTERDATA 162000.02 0 dtmf 9 (65624,57,2) 162000.02 0 ScriptEventCode 57 iLineState=1301 162000.02 0 LsGetNbrsRxDigits 9 162000.02 0 [Get Numbers 5] Number Input 99 162000.02 0 rv add [Get Numbers 5]{99} 162000.02 0 AddRVns [Get Numbers 5_PathTaken]{matched} 162000.02 0 TimeoutClear 162000.02 0 rv add [Hangup Time]{6/30/2004 4:20:00 PM} 162000.02 0 Hanging up call... [Hangup Module] 162000.02 0 RecSoundStop ok 162000.02 0 PlaySoundStop err=0 162000.04 0 TimeoutSet 2 EV_TIMEOUT_WAITFORIDLEAFTERLINEDROP 162000.04 0 fnHangupCall end 162000.11 0 callstate DISCONNECTED 65624,1,0 162000.11 0 ScriptEventCode 9250 iLineState=900 162000.11 0 LsAwaitingCalls EV_REMOTEPARTY_DISCONNECT 162000.11 0 rv add [Hangup Time]{6/30/2004 4:20:00 PM} 162000.13 0 Hanging up call... 162000.13 0 RecSoundStop ok 162000.13 0 PlaySoundStop err=0 162000.13 0 TimeoutSet 2 EV_TIMEOUT_WAITFORIDLEAFTERLINEDROP 162000.13 0 fnHangupCall end 162000.13 0 callstate IDLE 65624 0 0 162000.13 0 WorkingMode@Idle= 162000.13 0 TimeoutClear 162000.13 0 TimeoutSet 1 EV_TIMEOUT_TIMETOREINITLINE 162000.13 0 tapi Reply (LineEvReply) ok 66461 0 162000.14 0 tapi Reply (LineEvReply) ok 66001 0 162001.13 0 Timer fired EV_TIMEOUT_TIMETOREINITLINE 162001.13 0 ScriptEventCode 9008 iLineState=900 162001.13 0 LsAwaitingCalls EV_TIMEOUT_TIMETOREINITLINE 162001.13 0 ReinitTelephony due to IDLE 162001.13 0 tapic lineDeallocateCall(MainCall:65624) 0 162001.22 0 lineOpen(0)=> 162001.22 0 Waiting for a call... 162001.22 0 LineHandle=66254 162001.22 0 TimeoutSet 3 EV_TIMEOUT_ATERIDLE_ALLOWOUT 162004.50 0 Timer fired EV_TIMEOUT_ATERIDLE_ALLOWOUT 162004.50 0 ScriptEventCode 9013 iLineState=900 Share this post Link to post
SupportTeam Report post Posted 06/30/2004 10:59 PM Are you trying to do a transfer or a conference? What PBX are you using and how do you usually perform transfers (or conferences) with this PBX manually? Are you using a voice modem or a Dialogic card? What does the original caller hear when the system attempts to do the 3 way conference? Does the destination extension start ringing at all when you try to do the 3 way conference? Share this post Link to post
Guest ChrisAbston Report post Posted 07/05/2004 11:01 PM Trying to accomplish a 3-way confrence call. no pbx. Single line system. Hoping to use it for dead end voicemails. Also for the occasional need to actually have the call transferred to someone. Voice modem with TAPI 3.1. The modem flashes and then nothing then flashes back. I have intercepted the line after a flashhook but no DTMF tones are sent Share this post Link to post
SupportTeam Report post Posted 07/06/2004 03:26 AM The modem flashes and then nothing then flashes back. Is the original caller put on hold after the first flash and then yanked back from being on hold after the second flash? What does the caller hear at these times? Does the caller hear any on-hold music? Does your phone company support 3-way conference calls? how do you invoke the 3-way conference call if you do it yourself using a telephone handset? Share this post Link to post
Guest ChrisAbston Report post Posted 07/07/2004 12:34 PM The caller hears the first flash and then silence and then 3 or 4 seconds later the second flash. I haven't set up on-hold music to be heard to just silence. Yes, we have 3-way. When I do a 3-way manually once the first leg is connected whether I called out or I was called into then I hit the flash on my phone dial the other number and then flash back. Share this post Link to post
SupportTeam Report post Posted 07/08/2004 01:49 AM When doing 3 way conf calls manually do you 'flash back' at any time after dialing the other number or do you need to wait until the 3rd party answers the call? Share this post Link to post