Strange Disconnect Tone. Pbx Expert Can Not Learn.

[baltazar13]

Hi,

I would welcome some help on the following problem.

 

I am having a problem getting VG to recorgnise the diconnect tone. I have tried to use PBX expert but it failed at the step when trying to learn the disconnect tone.

 

I am using an old PBX called BT revelation in the UK.

 

I have also tried to follow your tutorial on using Audacity but I could not work out the frequencies and cadence.

 

I have attached the disconnect tone maybe you could help me find out the settings.

 

Many thanks

disconnect.wav

[SupportTeam]

This is just a single tone of about 430Hz which is on for about 5 seconds.

 

Try these settings:

 

<Freq1>430</Freq1>

<Freq1Dev>50</Freq1Dev>

<Freq2>0</Freq2>

<Freq2Dev>0</Freq2Dev>

<On>100</On>

<OnDev>20</OnDev>

<Off>0</Off>

<OffDev>0</OffDev>

<Count>0</Count>

 

[baltazar13]

This did the trick. Support reamins as excelent as usual. Thanks very much for your help.

 

This is just a single tone of about 430Hz which is on for about 5 seconds.

 

Try these settings:

 

<Freq1>430</Freq1>

<Freq1Dev>50</Freq1Dev>

<Freq2>0</Freq2>

<Freq2Dev>0</Freq2Dev>

<On>100</On>

<OnDev>20</OnDev>

<Off>0</Off>

<OffDev>0</OffDev>

<Count>0</Count>