Pbx And Caller Id Problem

[Guest davclark]

I've got a Lucent Partner ACS R6 that seems to remove the caller id from the ringing extensions. I get caller id in voiceguide when the CO line is plugged right into my dialogic card, but not when it goes through the PBX to the extensions. Is there some way around this?

 

Thanks,

Dave

[SupportTeam]

You can setup the PBX to pass the CallerID (and other information) as 'Inband Signalling'.

 

See: http://www.voiceguide.com/vghelp/source/ht...ndsignaling.htm