Guest Reg Report post Posted 10/31/2003 01:38 AM Hi there. I've downloaded the beta version 5.1.2301 (on trial), and am trying to get it to run on a machine with XP and a voice modem. My intention was to dial a set of predefined numbers at predefined times, each time playing a different wav file as a message. I though I'd try to achieve this through creating a suitable OutDial_New.txt file, but I haven't managed to get much to work, including the examples in the help file. Here's a sample OutDial_New.txt file I'm using: 01:23 AM 31/10/03, "07974357087", 0, 2, none, C:\Program Files\VoiceGuide\system\voice\MaxRecTime.wav, C:\Program Files\VoiceGuide\system\voice\MaxRecTime.wav, The entries seem to load, and the modem dials but then something goes wrong. In the log there's often a bit that looks like this: Dialing: Playing introduction message 013007.44 0 Script Load C:\Program Files\VoiceGuide\system\voice\MaxRecTime.wav 013007.44 -1 ERROR 5.1.2301 VgsScriptLoad [C:\Program Files\VoiceGuide\system\voice\MaxRecTime.wav]:0 013007.44 0 Not loaded: C:\Program Files\VoiceGuide\system\voice\MaxRecTime.wav 013007.45 0 ERROR 5.1.2301 Loading Script err=-1, C:\Program Files\VoiceGuide\system\voice\MaxRecTime.wav 013007.45 0 StartLoadedVgs at 31/10/2003 01:30:07 013007.45 0 ERROR 5.1.2301 StartLoadedVgs: Script not initialised for this line What's wierd too is that to start with the phone I was calling would ring, but now this doesn't always happen either. Note that I'm using the WAV files from the system folder provided with the programme so they should be in the right format. WHere am I going wrong? Many Thx R Full Log Below 012919.91 0 Loading from C:\Program Files\VoiceGuide\data\OutDial_New.txt 012919.92 0 dial callque insert tel:"07974357087" scr:C:\Program Files\VoiceGuide\system\voice\MaxRecTime.wav time:310310130 esc: 012919.92 0 Loaded 1 entries. 013000.97 0 dial callque update id=18 next call time 0310310132 013000.97 0 dial callque DB update returned 013000.98 0 dial found entry: tel["07974357087"] ann[none] vgs[C:\Program Files\VoiceGuide\system\voice\MaxRecTime.wav] am[C:\Program Files\VoiceGuide\system\voice\MaxRecTime.wav] 013000.98 0 Calling MakeCallEx(07974357087) 013001.00 0 Dialing: 07974357087 013001.00 0 MakeCall => 66000 013001.00 0 TapiCbTrigSet 66000 7002 013001.02 0 tapi Reply (LineEvReply) ok 66000 0 013001.02 0 TapiCbTrigClear 013001.02 0 callstate DIALING 66154 0 0 013001.03 0 callstate PROCEEDING 66154 0 0 013007.42 0 callstate CONNECTED 66154,0,0 013007.42 0 WorkingModeTAPI@Connected= 013007.42 0 WorkingModeScript@Connected= 013007.42 0 Dialing: Playing introduction message 013007.44 0 Script Load C:\Program Files\VoiceGuide\system\voice\MaxRecTime.wav 013007.44 -1 ERROR 5.1.2301 VgsScriptLoad [C:\Program Files\VoiceGuide\system\voice\MaxRecTime.wav]:0 013007.44 0 Not loaded: C:\Program Files\VoiceGuide\system\voice\MaxRecTime.wav 013007.45 0 ERROR 5.1.2301 Loading Script err=-1, C:\Program Files\VoiceGuide\system\voice\MaxRecTime.wav 013007.45 0 StartLoadedVgs at 31/10/2003 01:30:07 013007.45 0 ERROR 5.1.2301 StartLoadedVgs: Script not initialised for this line 013007.47 0 dial callque delete id=18 013007.58 0 callstate DISCONNECTED 66154,1,0 013007.58 0 LsWaitAfterDialingOut EV_REMOTEPARTY_DISCONNECT 013007.58 0 dial callque delete id=18 013007.59 0 dial no escalation info 013007.59 0 Hanging up call... [Disconnect in LsWaitAfterDialingOut] 013007.61 0 RecSoundStop ok 013007.61 0 PlaySoundStop ok 013007.61 0 Waiting for a call... 013007.61 0 fnHangupCall end 013007.63 0 callstate IDLE 66154 0 0 013007.63 0 WorkingMode@Idle= 013007.63 0 LineState(iLineId).iVgsIdx = 0 013007.64 0 tapi Reply (LineEvReply) ok 66035 0 013007.64 0 tapi Reply (LineEvReply) ok 66137 0 013008.64 0 LsAwaitingCalls EV_TIMEOUT_TIMETOREINITLINE 013008.64 0 ReinitTelephony due to IDLE start 013008.64 0 tapic lineDeallocateCall(MainCall:66154) 0 013008.69 0 lineOpen(0) => 0 013008.70 0 Waiting for a call... 013008.70 0 lineOpen(0)LineHandle=66086 Share this post Link to post
