Configuring Voip

[briesmith]

I'm having one last go at configuring Dialogic 4pci vers 6 drivers and VG ver 7.2.2 (website says 7.2.3 but it's 7.2.2 that arrives) to work with a BT Analogue phone line on my Windows XP/SP3 m/c - asking a lot I know but the VG website says it works out of the box if you follow their instructions which I have faithfully done for each one of the 10 or so install-uninstall-reinstall cycles I have gone through - but preparing for the inevitable outcome I'm getting ready to have a go at VoIP.

 

What I don't understand is how I can persuade the Voip provider Voicenet Solutions that the Dialogic HMP/VG software the router is connected to is a Cisco IPPhone 7960 configured the way Voicenet Solutions switch software wants it to be.

 

Any concrete advice you can give will be very much appreciated.

[SupportTeam]

how I can persuade the Voip provider Voicenet Solutions that the Dialogic HMP/VG software the router is connected to is a Cisco IPPhone 7960 configured the way Voicenet Solutions switch software wants it to be.

Dialogic HMP can register itself with a SIP Server. This is basically what the Cisco IPPhone is doing. Instructions on setting up HMP to do SIP registrations are provided here:

 

http://www.voiceguide.com/vghelp/source/html/install_v7_dialogichmp.htm

 

and

 

http://www.voiceguide.com/vghelp/source/html/config_voip_register.htm